Driveway Patio Repair
Latex Concrete Patio & Driveway Repair and Resurfacer
FAST-SET LATEX CONCRETE, ODOR FREE! FLOOR PATCH AND RESURFACER.
CRETE is an industrial grade concrete patio and driveway repair product that can be used both inside and out. Made from a combination of high strength cements, super hard aggregates and a high quality liquid polymer.
CRETE can be applied at any depth and will hold a feather edge without cracking. It will lift minor low spots or depressions.
CRETE was designed for lighter traffic areas where floors are subjected to hand trucks and push cart traffic. It can withstand auto traffic but should not be used where there is heavy lift truck traffic or steel wheels.
It makes an excellent under layer as it can be mixed to a very fluid consistency. It sets in less than 2 hours in most applications. It can also be used for repairing vertical surfaces such as steps, walls, curbs, etc.
- Coverage: 50 sq. ft. @ 1/8"
- Packing: 5 Gallon Pails (50lbs)
- Color: Concrete Gray
- Dry Time: 2 hours @ 70° Fahrenheit
- Flexural Strength: 2.00 PSI
- Tensile Strength: 850 PSI
- Compressive Strength: 5800 PSI
- Bond Strength: 700 PSI
CRETE is very easy to mix and apply. The area to be repaired must be clean and free of all oil, grease, dirt, etc. The surface may be damp but there should be no puddles. Excellent for garage floors, driveways, patios, sidewalks and vertical surfaces.
Blend the premature powder and liquid right in the shipping pail. Be sure the powder is completely wet and will be mixed in. A drill mixer or mortar mixer can be used to mix the product. You can adjust the mix to obtain the desired consistency. By adding water to the mix, you can make it more fluid. By not using all the liquid polymer, you can make it stiffer. Apply with a steel trowel and allow to dry for 2 hours before opening to traffic.
Available in regular or low temp formula.